 |
|
Icom IC-765 (IC 765 IC765) Adjustment the motors control unit
|
| |
The feedback circuit that controls the tuning motors becomes sensitive
after a few months of ageing. It requires a one time adjustement to correct.
-
Remove top cover and locate the antenna tuner board.
-
Locate r5 and R10 and set them to the center of their range.
-
Set radio as follows:
Tuner on
Frequency 14.100 MHz
Mode RTTY
-
After transmit is engaged for 30 seconds,
-
Adjust each control (R5 and R10) so neither motor tunes while changing
from SSB to RTTY and back to SSB.
Note:
R5 (right) controls right motor and R10 (left) controls left motor.
-
Repeat this adjustment to verify proper operation and then check on
all other bands.
-
Reinstall top cover and return to operation.
|
|
|
